Benjamin High Pressure Hand Pump - Best Recommendation
Click image to see larger image and other view
Details about Benjamin High Pressure Hand Pump
ASIN number: B00460IFPW
Brand: Crosman
The 3-stage high pressure pump is specially designed to fill PCP airguns. The Benjamin PCP pump has a universal adapter and works with the Benjamin Marauder, Woods Walker and Discovery, and the Crosman Challenger.
Specification of this Benjamin High Pressure Hand Pump
This product has many best features that make it great for you:
- 3-stage pump designed for pre-charged pneumatic (PCP) airguns
- Features universal adaptor for fitting Crosman and Benjamin airguns
- Sturdy grips, foot plate for stability and pressure gauge for monitoring pressure level
- Some assembly required
Where to get the best price?
We've found that Amazon.com is continously providing the best price for this product.
What other Customer Said?
Gets the job done
I charge my Benjamin Marauder to approximately 2800 psi, shoot until about 2000 psi and then recharge. This pump gets the job done, and well at that. I weigh approximately 200 lbs and use the downward force of my body to compress the pump. It takes somewhere between 30 and 50 pumps to get the 800 psi I need for a full recharge. I have been using this pump for approximately a month now and have not experienced any problems with it.
Could be better but it works fine
Things I liked:This pump works well. While I know these things are not cheap, this pump is fairly well made and has a nice bleeder valve. You will obtain large muscles from using this thing for sure! In my opinion, a hand pump is a must have for PCP rifles, even if you own a tank. With a rifle like the Marauder, this pump will take you from around 1800 psi to 2800 psi in around 85 to 90 pumps. You will need to take break when you are done!
Things I would have changed:With time, I feel the price on these hand pumps, along with other manufactures will likely fall a bit. This would be a much better price point in the 129.00 range as opposed to 179.00. Even still, despite many reviews, this pump is fairly well made.
What others should know:You will want to avoid over use of this pump by letting it get too warm. I you take very large shot strings and deplete the pressure in your rifle too much, you might want to fill part way, take a break to let the pump shaft and...
Great pump if you pump slowly
This pump was used and arrived in non-working condition. This was expected as there are numerous online complaints about failures of this pump. I called the manufacturer, Sun Optics (817 783 6553) and explained the problem. The Sun Optics tech was very courteous and explained that most of the failures were due to pumping too fast, causing excess heat and moisture in the pump.
Sun Optics quickly sent a replacement set of O-rings and emailed instructions. I replaced the damaged O-ring and the pump is now working very well to pressurize a Benjamin Marauder. I typically start at 2800 psi and shoot 30 rounds. It takes about 60 strokes of this pump to bring the pressure back up -- about 2 minutes of slow pumping.
No comments:
Post a Comment